Small Size Ball Valve
Home»Products»Petrol chemical»Small Size Ball Valve

Vatac Small Sized Welded and Threaded Ball Valves are Designed and manufactured strictly to International Standards ASME B16.34, BS 5351 or Equivalent, Featured with compact structure & Tight Shut-off service, Designed with Fire-safe, Anti-static and Blow-out, Available in both Full and regular ports, 

Ball valves, as the name implies, are stop valves that use a ball to stop or start the flow. The ball performs the same function as the disk in the globe valve. When the valve handle is operated to open the valve, the ball rotates to a point where the hole through the ball is in line with the valve body inlet and outlet. When the valve is shut, which requires only a 90-degree rotation of the handwheel or Wormgear for most valves, the ball is rotated so the hole is perpendicular to the flow openings of the valve body, and flow is stopped. Most ball valves are of the quick-acting type (requiring only a 90-degree turn to operate the valve either completely open or closed), but many are planetary gear operated. This type of gearing allows the use of a relatively small handwheel and operating force to operate a fairly large valve. The gearing does, however, increase the operating time for the valve. Some ball valves contain a swing check located within the ball to give the valve a check valve feature. Ball valves are normally found in the following systems aboard ship: seawater, sanitary, trim and drain, air, hydraulic, and oil transfer.


Vatac offers small sized ball valves in One piece uni-body, two piece split body and three piece bolted body, 
All small sized ball valves manufactured and supplied by Vatac are with the following features: 

● Manufactured under ISO 9001:2008 Management System, with CE PED 
● Standards compliance , BS 5351, ASME B16.34, DIN 3202 or equivalents
● Threaded or Welded Ends precised to international standards
● Fire Safe, Anti-staic and Stem Blow-out Proof
● Optional Locking Device or Stem Extension
● Optional Direct Mounting to ISO 5211
● Full Port or Regular Port options
● NACE MR-01-75

Vatac offers small size ball valves including, but not limited to
▲ One piece ball valve ▲ Two piece ball valve ▲ Three piece ball valve
▲ Top Entry Ball Valve▲ Wafer Body Ball Valve ▲ Multi-port Ball Valve

  •   Privacy Policy
  • © 2014 Vatac Valve Corporation. All Rights Reserved.